Keybinds

Find a settingCopy Anchor Link

Focus the settings menu and click Search, or press Ctrl+F or Ctrl+K. Enter a setting name, select a result with the arrow keys, and press Enter to open it. Press Esc to close search.

Search shortcuts apply while the menu has keyboard focus. Finish key capture before using them, because capture takes the next key press.

Assign or clear a keyCopy Anchor Link

1. Right-click the setting row to open its keybind options.
2. Choose Hold or Toggle.
3. Click Bind Key, then press a keyboard key or mouse button.

A bound setting shows its key beside the control. Click that key label to capture a replacement. Dedicated controls such as Activation Key also show a clickable key label, with options on right-click.

To clear a binding, start capture and press Esc or Delete. During capture, these keys remove the binding. To stop capture without replacing it, click the capture button again.

Choose the binding behaviorCopy Anchor Link

For example, start with an on/off setting disabled to make Hold enable it temporarily. If it starts enabled, holding the key disables it instead. Show All ESP is an exception: holding its key always enables the distance override, then restores the previous value.

For a slider, enter the temporary value in the keybind popup before capturing the key. Dedicated input keys, such as the grenade helper's Activation Key, can require the key to stay pressed regardless of the selected mode.

Save bindingsCopy Anchor Link

Open Config, select the profile you want to update, and click Save. To create a profile, enter a Configuration Name before saving. Use Set Default if that profile should load at startup.

Bindings are part of the profile JSON. See Configuration for profile paths and startup overrides.